TPMS Servicing

Service every sensor. Protect every tyre.

Servicing TPMS is a much overlooked, but important part of TPMS maintenance. As with all types of tyre valves, it is important that the integrity of the air seal is never compromised.
Autogem TPMS valve stems

97%Valve stem coverage

Laser etchedBatch traceable
Why it matters

Sensor valves don’t last forever

TPMS sensor valve stems are continuously exposed to the environment. Here’s what can happen when they’re not serviced.

Corrosion

Metal sensors suffer corrosion for a variety of reasons.

Perishing

Rubber snap-in sensors naturally perish over time.

Slow air leaks

A degraded valve may simply cause a slow air leak, which can be easily rectified.

Valve failure

More catastrophic scenarios can occur through complete valve failure or from low pressure in a leaking tyre.

Traditionally there was a lot of fear of breaking metal sensors during a service, so this practice was avoided. Our training courses are designed to give you confidence with the physical servicing process, as well as consumer engagement when servicing sensors.
The golden rule

Service the sensor at every bead break

The electronic life of a TPMS sensor typically far outlasts the life of a tyre. That’s why we recommend servicing the sensor every time – prolonging the life of the valve component.
1

Break the bead

Every tyre change is your chance to inspect the sensor valve.
2

Replace seals & fixings

Swap the sealing and fixing components using the correct service kit.
3

Extend sensor life

Keep the air seal intact and get the full electronic life from the sensor.
TPK03101Autogem TPMS valves
Valve quality matters

Because your reputation matters

We exclusively source our TPMS valves from the world’s largest TPMS valve manufacturer.
  • High-quality raw materials for corrosion resistance
  • Laser etching for batch tracing
  • Semi-universal TPK03101 valve with higher specifications than some OE valves
  • Superior performance and reliability
TPK15 & TPK14Autogem TPK15 and TPK14 storage solutions
Storage solutions

Specially curated storage

Designed to keep your TPMS parts organised and accessible, making reordering as simple as possible. Thousands of workshops purchase our replacement valve stems, allowing us to curate the part numbers you actually need.
97%Coverage in our single box first aid kit
360Piece wall mount storage system
Easy IDSticker packs & video instructions
TPT14 & TPT35Autogem TPT14 and TPT35 TPMS hand tool kits
TPMS handling

The right tools for every sensor

As different OE sensors come to market, the tools required to fit them increase. Now in its fourth version, our TPMS hand tool kit is designed to help with the correct handling of i-Sensor® and all OE sensors.
  • Fourth-generation TPMS hand tool kit
  • Works with i-Sensor® and all OE sensors
  • Helps ensure tight fitment
  • Reduces the chance of accidental damage
Get started

Ready to make servicing routine?

Watch our step-by-step servicing videos or speak to our team about the right valves, storage and tools for your workshop.