The i-Sensor® programme goes heavy-duty. Diagnose, programme and replace TPMS sensors across tractor units, trailers and buses – using the EVO or PRO tool already in your workshop.
Under UN Regulation R141 and EU 2019/2144, TPMS became a requirement for new heavy-vehicle type approvals from July 2022 – and for all new trucks, buses and trailers from July 2024. Every one of those vehicles that crosses into the UK brings a TPMS system into a British workshop, and the numbers are growing fast.
July 2022New type approvals
July 2024All new vehicles
10 minutesTo warn of a 20% pressure drop
The complete CV solution
Everything you need for heavy-duty TPMS
One trusted programme for cars, vans – and now trucks, trailers and buses. Three building blocks, one partner.
Diagnostic tools
Your existing i-Sensor® EVO and PRO tools gain full truck coverage with a simple, free software update.
Programmable truck sensor
A single replacement CV sensor that works with OE, third-party and aftermarket systems – valve or strap mounted.
Valve stems
The most common truck TPMS valve stems, available individually or in a ready-to-go assortment tray.
Free upgrade
i-Sensor® EVO & PRO
Your tool, now truck-ready
Update your EVO or PRO to the latest software and select the new TRUCK region – that’s it. No new tool to buy, no extra subscription and no hidden annual costs.
Free updates for the lifetime of your tool
Cars, light commercials and motorcycles still included as standard
Make, model and year selection with a configurator for over 70 axle combinations
Trailers included – even when they run on a different TPMS protocol
From the first scan to the final relearn, the EVO and PRO guide your technicians through every step of a commercial vehicle TPMS job.
Diagnose at the tyre
Read OE, aftermarket and third-party sensors – capturing sensor ID and pressure, plus battery status and air temperature on most sensors.
Whole-vehicle scanning
Work through the tractor unit and trailer in a single diagnose sequence, moving seamlessly around the combined vehicle.
OBDII read
Extract sensor ID codes directly from the tractor unit’s ECU – and from some trailer units – where supported.
OBDII write
Store new sensor IDs in the correct wheel positions in the vehicle ECU, where supported.
Guided relearns
Auto-learn and stationary learning procedures are explained step by step on screen.
Programme our truck sensor
Make the blank i-Sensor® truck sensor compatible with almost any OE or third-party system across multiple brands.
Axle configurator
Identify steering and drive axles and map every wheel position across more than 70 axle layouts.
Free for life
Truck coverage arrives as a free software update – with no subscriptions for vehicles outside truck, trailer and bus.
Make selection
Single diagnose
Multiple diagnose
OBD options
Relearn guidance
Tread depth
Sensor programming
Three ways to programme
Whatever condition the original sensor is in, there’s a fast route to a working replacement.
Auto duplicate
The original sensor still transmits but is damaged or has a low battery. Read it with the tool and clone its ID straight onto a new sensor.
Manual duplicate
The original sensor is dead or damaged, but you have its ID – from the ECU, the sensor label or a central record. Enter it and programme.
New ID
Create a brand-new sensor ID – just like fitting an OE part – then learn it into the vehicle ECU.
Truck sensor + strap cradle
TPSCV01 truck sensorStrap mounting cradle
i-Sensor® truck sensor
One programmable sensor. Every axle.
A single replacement sensor for tractor units, trailers and buses – compatible with the main tractor unit manufacturers, trailer platforms and the pressure monitoring systems used by fleet management companies.
Patented programmable blank with superior battery life
Operates at up to 14 bar / 203 psi
One SKU for valve or strap mounting
Strap system rated to 1,300 kg tensile strength, for 22.5” wheels
Thermal-resistant, reinforced housing
When strap mounting, the sensor should face the traditional valve hole. The full list of compatible systems is available on any updated EVO or PRO tool.
Choosing the right sensor
433 or 433 H?
When you select make, model and year on your tool, each system is clearly marked – so you always know which i-Sensor® to reach for.
433 Passenger-car style systems
Some light commercial vehicles use car-style TPMS. For these, your existing stock still does the job.
Use i-Sensor® TPS01 or TPS03 blanks
No new stock required
Same programming process as cars
433 H High-pressure truck systems
The “H” stands for high pressure – systems that need a sensor built for heavy-duty operating pressures.
Use the i-Sensor® TPSCV01 truck sensor
Rated up to 14 bar / 203 psi
Valve or strap mounted
CV TPMS First Aid Kit · TPKCVKIT01
Valve stems
The right valve for every truck sensor
Replacement valve stems are available as single units across the most common styles in circulation – or keep the CV TPMS First Aid Kit (TPKCVKIT01) on the shelf, an assortment tray covering the most popular truck valves in use today.
Single valve stems
The common OE styles, ready to order individually
Gen1 & Gen2 screws
Both styles supplied with every stem in the kit
Which screw? Use Gen1 for most sensors more than a few years old, and Gen2 for anything using the latest Schrader sensors.
See it in action
Strap mounting, step by step
Watch how to fit the i-Sensor® truck sensor using the strap mounting system.
Ready for heavy-duty TPMS?
Talk to our CV team
Find out how the i-Sensor® programme can help your workshop take on trucks, trailers and buses.