Commercial Vehicle TPMS

TPMS for trucks, trailers and buses.

The i-Sensor® programme goes heavy-duty. Diagnose, programme and replace TPMS sensors across tractor units, trailers and buses – using the EVO or PRO tool already in your workshop.
Truck and trailer fitted with TPMS

Free upgradeNew TRUCK region on EVO & PRO

Up to 14 barHigh-pressure truck sensor
2024TPMS mandatory on all new EU heavy vehicles
70+Axle configurations covered
1Programmable sensor, valve or strap mounted
£0Truck software upgrade

Why now

TPMS is now standard on Europe’s new trucks

Under UN Regulation R141 and EU 2019/2144, TPMS became a requirement for new heavy-vehicle type approvals from July 2022 – and for all new trucks, buses and trailers from July 2024. Every one of those vehicles that crosses into the UK brings a TPMS system into a British workshop, and the numbers are growing fast.
July 2022New type approvals
July 2024All new vehicles
10 minutesTo warn of a 20% pressure drop

The complete CV solution

Everything you need for heavy-duty TPMS

One trusted programme for cars, vans – and now trucks, trailers and buses. Three building blocks, one partner.

Diagnostic tools

Your existing i-Sensor® EVO and PRO tools gain full truck coverage with a simple, free software update.

Programmable truck sensor

A single replacement CV sensor that works with OE, third-party and aftermarket systems – valve or strap mounted.

Valve stems

The most common truck TPMS valve stems, available individually or in a ready-to-go assortment tray.
Free upgradei-Sensor EVO TPMS tool

i-Sensor® EVO & PRO

Your tool, now truck-ready

Update your EVO or PRO to the latest software and select the new TRUCK region – that’s it. No new tool to buy, no extra subscription and no hidden annual costs.
  • Free updates for the lifetime of your tool
  • Cars, light commercials and motorcycles still included as standard
  • Make, model and year selection with a configurator for over 70 axle combinations
  • Trailers included – even when they run on a different TPMS protocol

What your tool can do

One technician. One visit. Every wheel.

From the first scan to the final relearn, the EVO and PRO guide your technicians through every step of a commercial vehicle TPMS job.

Diagnose at the tyre

Read OE, aftermarket and third-party sensors – capturing sensor ID and pressure, plus battery status and air temperature on most sensors.

Whole-vehicle scanning

Work through the tractor unit and trailer in a single diagnose sequence, moving seamlessly around the combined vehicle.

OBDII read

Extract sensor ID codes directly from the tractor unit’s ECU – and from some trailer units – where supported.

OBDII write

Store new sensor IDs in the correct wheel positions in the vehicle ECU, where supported.

Guided relearns

Auto-learn and stationary learning procedures are explained step by step on screen.

Programme our truck sensor

Make the blank i-Sensor® truck sensor compatible with almost any OE or third-party system across multiple brands.

Axle configurator

Identify steering and drive axles and map every wheel position across more than 70 axle layouts.

Free for life

Truck coverage arrives as a free software update – with no subscriptions for vehicles outside truck, trailer and bus.

i-Sensor truck Make selection screen

Make selection

i-Sensor truck Single diagnose screen

Single diagnose

i-Sensor truck Multiple diagnose screen

Multiple diagnose

i-Sensor truck OBD options screen

OBD options

i-Sensor truck Relearn guidance screen

Relearn guidance

i-Sensor truck Tread depth screen

Tread depth

Sensor programming

Three ways to programme

Whatever condition the original sensor is in, there’s a fast route to a working replacement.

Auto duplicate

The original sensor still transmits but is damaged or has a low battery. Read it with the tool and clone its ID straight onto a new sensor.

Manual duplicate

The original sensor is dead or damaged, but you have its ID – from the ECU, the sensor label or a central record. Enter it and programme.

New ID

Create a brand-new sensor ID – just like fitting an OE part – then learn it into the vehicle ECU.
Truck sensor + strap cradle

i-Sensor TPSCV01 truck TPMS sensor
TPSCV01 truck sensor
Strap mounting cradle for the i-Sensor truck sensor
Strap mounting cradle

i-Sensor® truck sensor

One programmable sensor. Every axle.

A single replacement sensor for tractor units, trailers and buses – compatible with the main tractor unit manufacturers, trailer platforms and the pressure monitoring systems used by fleet management companies.
  • Patented programmable blank with superior battery life
  • Operates at up to 14 bar / 203 psi
  • One SKU for valve or strap mounting
  • Strap system rated to 1,300 kg tensile strength, for 22.5” wheels
  • Thermal-resistant, reinforced housing

When strap mounting, the sensor should face the traditional valve hole. The full list of compatible systems is available on any updated EVO or PRO tool.

Choosing the right sensor

433 or 433 H?

When you select make, model and year on your tool, each system is clearly marked – so you always know which i-Sensor® to reach for.
i-Sensor TPS01 sensors

433 Passenger-car style systems

Some light commercial vehicles use car-style TPMS. For these, your existing stock still does the job.
  • Use i-Sensor® TPS01 or TPS03 blanks
  • No new stock required
  • Same programming process as cars
i-Sensor TPSCV01 truck TPMS sensor

433 H High-pressure truck systems

The “H” stands for high pressure – systems that need a sensor built for heavy-duty operating pressures.
  • Use the i-Sensor® TPSCV01 truck sensor
  • Rated up to 14 bar / 203 psi
  • Valve or strap mounted
CV TPMS First Aid Kit · TPKCVKIT01TPKCVKIT01 CV TPMS First Aid Kit

Valve stems

The right valve for every truck sensor

Replacement valve stems are available as single units across the most common styles in circulation – or keep the CV TPMS First Aid Kit (TPKCVKIT01) on the shelf, an assortment tray covering the most popular truck valves in use today.

Single valve stems

The common OE styles, ready to order individually

Gen1 & Gen2 screws

Both styles supplied with every stem in the kit

Which screw? Use Gen1 for most sensors more than a few years old, and Gen2 for anything using the latest Schrader sensors.

See it in action

Strap mounting, step by step

Watch how to fit the i-Sensor® truck sensor using the strap mounting system.
Autogem CV TPMS sensor strap mounting instructions

Ready for heavy-duty TPMS?

Talk to our CV team

Find out how the i-Sensor® programme can help your workshop take on trucks, trailers and buses.