TPMS Buying Advice

Think TPMS. Think Autogem.

Independent advice for tyre installers choosing TPMS sensors. We’ve kept a watching brief on the more mature TPMS markets elsewhere – so our customers are future-proofed for tomorrow’s technology.
Autogem i-Sensor TPMS

IndependentAdvice you can trust

12 checksBefore you buy
130+OE sensors needed in Europe
290+OE sensors in the US market
3Types of universal sensor
12Things to check before you buy
Back to basics

Seven basic principles

To understand programmable and universal sensors, it’s important to remind ourselves of several basic principles.
1

TPMS sensors wirelessly transmit data from within each wheel to receiver unit(s), located within the chassis, which are connected to the ECU of the vehicle.
2

Each TPMS sensor has its own unique identifying code (ID), which is also incorporated into the data that it transmits. The vehicle ECU is programmed to accept data only from the sensors/IDs that it is paired with.
3

If a sensor is replaced in any of the wheels, the vehicle ECU must have the unique ID code of the new sensor programmed to it. If this is not completed, a TPMS light will remain illuminated because the vehicle would not be able to accept data from the new sensor.
4

There are a multitude of different sensors, for different vehicles, that transmit their data with different protocols – in layman’s terms, languages. For example, a Renault vehicle may only listen to sensors that speak the Renault language, and only those that speak it with the correct accent.
5

Certain vehicles can auto-learn the ID codes of new replacement sensors, others must be electronically programmed with a compatible diagnostic tool – commonly referred to as an OBD reset. The ‘drive around’ or ‘active’ auto-learn can be problematic, as it requires driving within set speeds, in some cases for as long as 20 minutes.
6

Even now, a large number of sensor replacements are due to broken or corroded valve stems. The vast majority of these sensors are still able to transmit their ID codes and pressure data.
7

In Europe there are already over 130 different OE sensors required to have full range coverage of the current vehicle parc. This number is rapidly increasing – and in the more mature US market there are over 290 different OE sensors.
Universal sensors

Three types of universal sensor

Universal sensors can come in several different forms. Here’s how they compare.
Autogem i-Sensor®

Blank programmable sensors

A single sensor, with a compatible electronic tool, can be programmed to speak many different protocols – and can replicate the existing ID of the sensor being replaced, negating the need for any ECU reset.
  • Minimal stock holding, wide availability
  • Clone existing IDs – no ECU reset
  • Coverage improves instantly with a tool update
Hybrid

Hybrid pre-programmed multi-application

Combines a pre-programmed sensor with extra memory to add new protocols post-manufacture – assuming there’s sufficient memory and the tool is up to date.
  • Multiple versions with different base coverage
  • Limited by memory inside the sensor
  • May not be reprogrammable after user error
1:1 sensors

Pre-programmed non-OE sensors

Replicate OE sensors with their own pre-set unique ID – in theory working like an OE sensor, at a discounted price.
  • Treated just like the comparable OE sensor
  • OBD reset needed if the car can’t auto-learn
  • Several bodies may be needed to cover the parc

As a collective, these sensors are often called ‘multi-sensors’. Depending on the memory inside the sensor, they can store varying numbers of protocols – so you may need a varying number of sensor replacement bodies to cover the whole vehicle parc.
Before you buy

Differentiating blank programmable sensors

What should you be looking for? Tap each point to find out more.
Ability to clone sensor ID codes
Cloning the sensor ID code means you do not have to do any form of reset procedure. In effect you are programming the sensor, not the vehicle ECU – saving considerable time and removing the need to invest in more expensive diagnostic equipment.
Coverage
What percentage of the vehicle parc can the sensor currently work with, and how proactive are the developers in keeping up with new protocol releases?
Cost of sensor
How much does a replacement sensor cost, and does it come complete with the valve stem? If not, what is the total cost including the valve?
Number of sensors required
How many do you need to achieve maximum vehicle parc coverage? Consider stocking, application complexity and cost factors.
Obsolescence
New OE sensors often mean new protocols. Pre-programmed sensors will not immediately have new protocols available – meaning more sensors, newer generations, or older stock covering less of the parc.
Blank sensors are often seen as more future-proof, as protocols are transferred from a tool carrying an easily updated database.
Ability to reprogramme sensors
Once programmed, can the sensor be reprogrammed in case of user error? Does it lock out after a certain number of attempts, or can it be reprogrammed an infinite number of times?
Simplicity of process
From a technician’s perspective it is massively important that working with or creating sensors is as simple and efficient as possible – otherwise they may revert to a simpler process.
Mobility
Can sensors be cloned away from a computer or network? Some systems need a computer to programme the sensor, removing the ability to clone in the workshop or out in the field.
Cost of programming tool
How much does the equipment cost, and does the provider charge for future updates?
Wireless vs contact programming
Wireless programming is often slower and may need another device or network. Contact programming can often be done via a fully mobile tool – but unless the technology is advanced, may involve breaking down the tyre after user error.
WAL & new TPMS technology
The sensor must deal with the latest Wireless Auto Locate systems, or auto-learning may be compromised. If the sensor can clone ID codes effectively, however, WAL is not a concern.
Battery life
Does the sensor have a quality internal battery and what is its expected life? Is it supplied ‘switched off’? Sensors needing wireless activation sit on stand-by, depleting their batteries while not even in use.
Some OE sensors ship in “Shipping Mode” – your TPMS equipment must be able to disable this before the sensor will communicate with the vehicle.
Multiple solutions

We assess so you don’t have to

We are regularly offered different solutions from different sensor and equipment manufacturers. We take the time to assess each product for its efficiency and effectiveness, so we can offer the correct products for our customers. We’ve even created a scoring system for the technologies we’ve been advised of, helping retailers understand the systems they’re being offered.
General TPMS buying advice

Questions to ask your TPMS provider

TPMS is not simply a part number that’s ordered and forgotten. It’s a programme that needs a complete package of support – so you can deal with whatever sensor problems arrive in your fitting bays.
1

What systems do they provide, and how do they score on functionality, cost, effectiveness and stock inventory?
2

Does the supplier offer a complete product portfolio?
3

What level of technical support can be provided?
4

What training can be provided, and via what medium?
5

What experience does the supplier have with the category?
6

Does the supplier have access to, or knowledge of, new technologies?
Not sure which system is right?

Talk to our TPMS experts

Please do speak to our experts for advice on any programmable solution you are considering.